JUAL ALAT COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR 081-394-133-446

Compressive Strength of Hydraulic Cement 

Mortar 

(item code : RE-160)

Dimension (l x w x h)	: 60 x 60 x 60 cm
Gross Weight	: 50 kg

ASTM C-109		AASHTO T-106
For determining compressive strength of hydraulic cement mortar by using 2″ cube speciment
RE-161	Cement Cube Mold	Cast iron, 3 gang, 2″ x 2″	1 Pc
RE-162	Flow Table	Hand Operated
Consist of:
RE-162.1	Frame	Welded steel, brass table, 10″ dia., 0.3″ thick, 1/2″ drop	1 Pc
RE-162.2	Flow Mold	Brass, base 101.6 mm dia., top 69.85 mm dia., top 69.85 mm dia., height 50.8 mm	1 Pc
RG-713	Vernier Caliper	300 mm capacity	1 Pc
RE-168	Tamper	Plastic, 1/2″ x 1″ face, 6″ strength	1 Pc
RG-396	Glass Plate	Glass, 10 mm thick, 30 x 30 cm	1 Pc
RG-403	Graduated Cylinder	250 ml capacity	1 Pc
RG-825	Scraper	Plastic handle	1 Pc

Also required, but not part of this set : RE-169 Standard Sand (# 20; # 30)RG170 Compression Machine RG-152 Triple Beam Balance RG-363 Mixing Bowl RG-700< Stop Watch RG-747 Rubber Gloves RG-950 Mortar Mixer.

Read More

JUAL ALAT WATER CONTENT IN PETROLEUM PRODUCTS DI PAPUA, DI JAYA PURA 081 394 133 446

          Water Content In Petroleum Products

(item code : RL-120)

Dimension (l x w x h)	: 25 x 25 x 60 cm
Gross Weight	: 10 kg

ASTM D-95		AASHTO T-55
For determining water in crude petroleum, tars and products derived from these materials.
RI-121	Flask	Heat resistance glass, 500 ml capacity	1 Pc
RI-122	Water Trap	Glass for receiving distilated water	1 Pc
RI-123	Condenser	Glass, jacketed	1 Pc
RI-124	Support Assembly	For holding apparatus assembly	1 Set
RI-125	Flask Support	Variable height adjustment	1 Pc
RG-230	Bunsen Burner	Heat resource	1 Pc
RG-237	Asbestos Wire Gauze	15 x 15 cm	1 Pc

Also required, but not part of this set :RG-152 Triple Beam BalanceRG-203 Cooling System RG-222 Butane Field Heater RG-473 Glass Funnel RG-748 Leather Gloves

Label: ASPHALT

Read More

JUAL ALAT SPECIFIC GRAVITY OF SEMI-SOLID BITUMINOUS MATERIALS DI PAPUA, DI JAYA PURA 081 394 133 446

Specific Gravity of Semi-Solid Bituminous 

Materials   

(item code : RL-100A)

Dimension (l x w x h) : 20 x 20 x 20 cm Gross Weight : 3 kg

ASTM D-70		AASHTO T-228
For determining the specific gravity of semi-solid bituminous materials, asphalt cement, and soft tar pitches by use of a picnometer,
RI-101	Picnometer	Hubbart type, 24 ml capacity	1 Pc
RI-102	Picnometer	Hubbart type, 25 ml capacity	1 Pc
RG-642	Thermometer	ASTM     63 C, 8-32oC	1 Pc

Also required, but not part of this set :

RG-191	Hot Plate
RG-363	Mixing Bowl
RG-473	Funnel

Label: ASPHALT

Read More

JUAL ALAT SOFTENING POINT TEST SET DI PAPUA, DI JAYA PURA 081 394 133 446

                  Softening Point Test Set

(item code : RL-210A)

Dimension (l x w x h)	: 90 x 30 x 30 cm
Gross Weight	: 10 kg

ASTM D-36		AASHTO T-53
For determining softening point of asphalt and tar using the ring and ball method
RI-211	Shouldered Ring Assembly	Machined brass, height adjusment	1 Set
RI-212	Standard Ball	Steel ball, 9.52 mm dia.	2 Pcs
RI-213	Flash Support	Mesh wire gauze variable height adjustment	1 Set
RI-214	Support Assembly	Metal, provided with thermometer holder	1 Set
RG-230	Bunsen Burner	Heat resources	1 Pc
RG-237	Asbestos Wire Gauze	15 x 15 cm	1 Pc
RG-424	Beaker Glass	1000 ml capacity	1 Pc
RG-646.1	Thermometer	ASTM     15 C, 2 to 80oC	1 Pc

Also required, but not part of this set :RC-473 LadleRG-222 Butane Field Heater RG-363 Mixing Bowl RG-700 Stop Watch RG-820 Spatula

Label: ASPHALT

Read More

JUAL ALAT SAYBOLT VISCOCIMETER DI PAPUA, DI JAYA PURA 081 394 133 446

                     Saybolt Viscosimeter

(item code : RL-150A)

Dimension (l x w x h)	: 70 x 70 x 70 cm
Gross Weight	: 25 kg

ASTM D-88		AASHTO T-72
For determining saybolt viscosity of petroleum products at specified temperature between 21.1 and 98.8 C.
RI-151	Viscosimeter	Stainless steel bath, motor stirer, 220 V-AC, Thermostat control panel, 2 tubes capacity	1 Set
RI-154	Viscosimeter Tube	Brass, seamless, provided with tips and tip wrench	2 Pcs
RI-155	Tube Wrench	T-wrench	1 Pc
RI-156	Pipet	Brass with rubber bulb	1 Pc
RI-157	Thermometer Support	Alumunium plate	2 Pcs
RI-158	Flask	60 ml capacity	2 Pcs
RI-159	Funnel	Brass, 60oangle, complete with mesh 100 / mesh 200	1 Pc
RG-644.1	Thermometer	ASTM     17 C, 19 to 27oC	2 Pcs
RG-644.2	Thermometer	ASTM     18 C, 34 to 42oC	2 Pc
RG-644.3	Thermometer	ASTM     19 C, 49 to 57oC	2 Pcs
RG-644.4	Thermometer	ASTM     20 C, 57 to 65oC	2 Pc
RG-644.5	Thermometer	ASTM     21 C, 79 to 87oC	2 Pcs
RG-644.6	Thermometer	ASTM     22 C, 95 to 103oC	2 Pc

Also required, but not part of this set :

RG-700

Stop WatcH

Label: ASPHALT

Read More

JUAL ALAT RELFUX EXTRACTOR TEST SET DI PAPUA, DI JAYA PURA 081 394 133 446

                  Reflux Extractor Test Set

(item code : RL-310)

Dimension (l x w x h)	: 90 x 50 x 50 cm
Gross Weight	: 15 kg

ASTM D-2172		AASHTO T-164
For determining bitument content in hot mixed paving mixture and pavement sample
RI-311	Reflux Extractor
Consist of :
RI-311.1	Glass Jar	Pyrex 6″ i.d approx.	1 Pc
RI-311.2	Funnel	Two wire mesh screen cone	1 Pc
RI-311.3	Condensor	Brass/copper	1 Pc
RI-312	Hot Plate	220 V-AC, 1000/1500 Watt	1 Set
RI-313	Filter Paper	Low ash filter paper	1 Box
RG-216	Asbestos Wire Gauze	15 cm x 15 cm	1 Pc

Also required,
but not part of this set :

RI-304 Solvent (CCL4)

RG-152 Triple Beam Balance

RG-174 Drying Oven

RG-203 Cooling System


Label: ASPHALT

Read More

JUAL ALAT MOT STRGIATHG EGDE DI PAPUA, DI JAYA PURA 081 394 133 446

                       Mot Straight Edge

(item code : RL-470)

Dimension (l x w x h)	: 350 x 30 x 30 cm
Gross Weight	: 20 kg

For measuring the irregulation of road surface both asphalt and concrete pavement.
RI-471	Mot Straight	Alumunium profile, 3 meter length, with handle	1 Pc
RI-472	Metric Wedges	Variable measurement from 2.5 – 7.5 cm, machine cast alumunium	1 Pc

Label: ASPHALT

Read More